Hot Tub Install DIY

Planning an installation of the hot tub is very essential. First of all, you need to think about where you are going to place the hot tub; is it going to be indoor or outdoor? Furthermore, there are also some codes that you need to follow for various safety reasons regarding gas, electric, etc.

Placing the equipments of the hot tub also needs to be done just like what the code says. The area that you need for the equipment will be around 5’ by 3’ and the distance of the tub to the equipment has to be at least five feet. To make sure about the regulation, you need to check with the local codes since different regions might have different rules regarding the placement of the hot tub equipment. Most people like to place it further than five feet though. The reason is because when the equipment is further away, there will not be so much noise that you hear while you are operating the hot tub. As a consequence, there will be more resistance and it might drop the water pressure in the jets.

If you choose to install your hot tub by using a gas heated unit, then your system would run the gas line to the heater, just like the electric system runs to the pumps. Installing the hot tub would require certain knowledge of gas, water, and electric system. So you need to consider about how well you know about those things. Otherwise, you could be extra careful by hiring a professional. Before starting it, you need to check with the local codes because some areas would require the hot tub system to be installed by professionals.

Furthermore, you need to consider about the base that you would use for the hot tub. The base must be able to handle the weight of the hot tub before and after it is filled with water, and of course it must manage the weight of people inside it too. You need to select the perfect choice of base to make sure there would be no damages or accidents caused by the inappropriate option of the base.

As it needs a lot of planning, the result of installing your new hot tub would be wonderful. Of course, it is important to always check with the local building codes to make sure you follow all of the guidelines. Even though you can save a lot of money by doing it yourself, sometimes it is wise to let the work done by people who have more knowledge about those kinds of things.

Moreover, the hot tub might require certain maintenance in order to be operated properly and avoid any damages. But at some point, there is a possibility that the hot tub might need some repairs. It is just like the installation; if you think you do not have the suitable knowledge of hot tub system, it might be the best decision to call a professional help. Otherwise, you can certainly fix the hot tub yourself.

For fixing some cracks on the hot tub, it is recommended to get it done by using a fibreglass repair kit which is available in many places such as garden stores or any repair shops. During the process, you would need to drain the tub and clean the tub from substances like oils, waxes, or dirt surrounds the cracking area beforehand.

If you have electrical problems with the hot tub, it would be better if you call for the professional help unless you are experienced with electrical circuit and how things operate. The reason is because fixing the electrical problems without a full understanding can cause either more damage or it could also be very dangerous.

While it is possible to do everything by yourself, you must understand the limit about what you know and what you do not know, what you can do and what you can not do.